Usage

• Gelcoat for CFRP-mouldings
• Gelcoat for mouldings in model making and prototyping

Characteristics

• Transparent, dense gelcoat
• Good spreading properties and good wetting
• Good mechanical resistance
• Good edge stability
• In thin layers non sagging
• With hardener Biresin S15 for extended potlife

Color

Packaging

Usage

• Gelcoat for manufacture of master models and gauges
• Gelcoat for manufacture of negative moulds e.g. for composite production
• Gelcoat for manufacture of vacuumforming moulds
• Gelcoat for other heatable production facilities

Characteristics

• Black gelcoat
• Polishable to high gloss
• Good grindability
• Good spreading properties
• Good heat resistance up to 130°C
• Dense surface and good edge stability
• Good styrene resistance

Color

Packaging

Biresin S8, A+B Pack: 6 x 0,4 kg net resin + 6 x 0,08 kg net hardener in a box
Biresin S8 resin: 5 kg net
Biresin S8 hardener: 1 kg net

Usage

• Gelcoat for manufacture of master models, gauges and negatives
• Gelcoat for other production facilities

Characteristics

• White
• Good spreading properties
• Dense surface, mechanical resistant
• Good edge stability
• Good workable, e. g. grindable

Color

Packaging

Biresin S10, A+B Pack white: 6 x 0,4 kg net resin + 6 x 0,04 kg net hardener in a box
Biresin S10 resin white: 20 kg; 5 kg net
Biresin S10 hardener: 2,5 kg; 0,5 kg net

Usage

• Gelcoat for manufacture of vacuumforming moulds
• Gelcoat for foundry patterns
• Gelcoat for other moulds and models

Characteristics

• Grey gelcoat
• Good spreading properties and non sagging up to 1 mm
• Good mechanical and heat resistance
• Good abrasion resistance
• Good solvent and styrene resistance

Color

Packaging

Usage

• Gelcoat for polyester and foam mouldsGelcoat for LP-RIM-moulds
• Gelcoat for LP-RIM-moulds
• Gelcoat for gauges and negatives in tooling
• With hardener Biresin F4 (mixing ratio in pbw 100 : 10) as a casting resin for repairs and correction up to 10 mm thickness
• Gelcoat for foundry patterns
• Gelcoat for laminates and other constructions

Characteristics

• Green gelcoat with good spreading properties
• Good mechanical resistance
• Good workable
• Good chemical and heat resistance
• With hardener Biresin S15R for shorter potlife and faster curing

Color

Packaging

Usage

• Gelcoat for manufacture of foundry patterns
• Gelcoat for match plates

Characteristics

• Blue-grey gelcoat
• Good spreading properties
• Hard, good mechanical resistance
• Good heat resistance
• Very good abrasion resistance

Color

Packaging

Usage

• Gelcoat for manufacture of vacuumforming moulds
• Gelcoat for injection moulds
• Gelcoat for laminating moulds and bonding fixtures

Characteristics

• Grey gelcoat
• Good spreading properties
• Hard, good mechanical resistance
• Very good heat resistance

Color

Packaging

Usage

• Casting of high tear and impact resistant parts and tools, e. g. larger core boxes
• Casting of tough-hard coatings
• With resin Biresin U1420 S Neu in green as gelcoat for foundry patterns and core boxes
  

Characteristics

• Both components without toxic classification
• 1 universal hardener Biresin U1420 Neu
• Long potlife for big volumes with Biresin U1420L Neu resin
• Fast demoulding for changes and repairs with Biresin U1420F Neu resin
• Very high abrasion resistance
• Very good impact resistance and tensile strength
• Insensitive to moisture
• Short demoulding time without brittleness phase
• Low shrinkage

Color

light-beige casting resin
green gelcoat

Packaging

Biresin U1420 S Neu AB pack: 6 x 0.4 kg net Harz + 6 x 0.16 kg net in a cardboard box
Biresin U1420L Neu resin: 20 kg; 6 kg net
Biresin U1420F Neu resin: 6 kg net
Biresin U1420C Neu resin: 21,5 kg; 6,5 kg net
Biresin U1420S Neu resin: 5,25 kg net
Biresin U1420 Neu hardener: 14 kg; 4,2 kg; 2,1 kg net